[:\] Disgruntled Machine
Coveted Electronics
Archive Feed
oscillateur: The cat was fascinated by the Man-Machine this morning and sat there for the whole album. Her fave track: The Robots (Taken with instagram)
dogpolice: Tricked out Flower Filter recase for white gimp mask
im1004: The Twilight Zone “In His Image” (1963)
[Flash 9 is required to listen to audio.]

This is my first APC40 jam. I finally figured out how to get loops set up! yay! I have lyrics written, but not recorded

“ Tumblr makes me horny
atomiumamps: Here’s something for the pedal nerds. This is a pair of back-to-back clipping diodes connected in parallel, like you find in the Rat distortion pedal. One diode clips the positive-going side of the wave, the other clips the negative-going side. They’re fed by a .047uF coupling cap and 1K series resistor. The scope trace shows a large sine wave (8Vpp), which is the input signal before the coupling cap. The smaller signal is the clipped output. The negative side has the diode connected directly to ground, so the clipping is hard and fairly rectangular. The positive side has a 390-ohm resistor in series with the diode to ground, so the clipping is much softer. What happens is: The negative side shunts to ground directly when the amplitude exceeds the diode’s turn-on voltage. The positive side forms a voltage divider with the 1K series resistor and the 390R shunt resistor, when the amplitude exceeds the turn-on voltage. Compression! Easy way to broaden the knee of a diode clipper.
Yamaha pss-50
Yamaha pss-50
Skinned Furbys!
1 2 3 4 Next
Gold Dust by 44. Get the Pro Version